Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does a Garage Door Cost in Dunning?
Garage door work in Dunning typically runs $150 – $600 for most repairs, with a single spring repair at $180 – $340 and a new door installation at $700 – $2200. The wide gap comes down to what’s actually broken. A snapped torsion spring and a full replacement are different projects entirely, and the estimate you get should reflect that.
We repair, install, and stock parts for garage doors only, which means the person at your door is working on the same system all day, every day. Estimates are free, service is same-day in most cases, and we can work with your insurer when a door gets damaged. Call (833) 468-5695 to get a written number before anyone touches the door.
Key Takeaways
- Most Dunning garage door repairs land between $150 and $600, parts and labor included.
- A single torsion or extension spring runs $180 – $340; a matched pair is usually replaced together, so a pair costs about twice that.
- New door installation is $700 – $2200 depending on door size, material, and whether the existing track and hardware are reused.
- Opener repair is $120 – $320; a full opener installation is $250 – $550.
- The written estimate sets the final price. Nothing gets added after the fact without your say-so.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs cost in Dunning this year. These are typical estimated ranges for the neighborhood market, not a fixed menu. The written estimate you get on site is the number that counts.
| Service | Typical Estimated Cost |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
What pushes a job toward the top of its range? The answer is usually access and condition. A torsion spring on a standard seven-foot door is a straightforward swap. The same spring under a low-clearance setup, behind a finished ceiling, or on a door that’s been fighting a bent track for months is a longer job. Cables that have frayed and wrapped around the drum take more time than a clean break. Panels on a discontinued door profile cost more than a current one because the panel has to match what’s already there.
What pulls a job toward the bottom? Getting to it early. A roller that’s squealing is a $110 – $220 fix. Ignore it and the vibration works its way into the hinges and then the track, and now you’re looking at track realignment stacked on top. The right fix, not the most expensive one, is the whole point of a proper diagnosis. We work on the brand you already have rather than steering you toward a replacement, and that starts with figuring out what actually failed.
What Affects Garage Door Pricing in Dunning
Dunning is a Northwest Side neighborhood of mostly post-war brick bungalows and ranches, with a mix of detached garages on alleys and attached garages cut into the house. That housing stock shapes what a door job looks like far more than any price list does.
- Garage construction. A detached garage on a rear alley means the technician works outside in whatever the weather is doing. An attached garage means working inside, often with a car to move and a low ceiling to watch. Both add or subtract time depending on the setup, and time is most of what you’re paying for on a repair.
- Door age and profile. Plenty of Dunning doors are original or one replacement old, which means odd sizes and discontinued panel profiles. Matching a panel on a 30-year-old door is a different job than swapping one on a door still in production. That’s a big part of why panel replacement runs $250 – $500.
- Spring type and count. Torsion springs on the header above the door and extension springs along the sides are different jobs with different safety margins. Most doors use two springs, and when one breaks the other is usually at the same point in its life. A single spring is $180 – $340; a pair is about twice that. We’ll tell you honestly whether the second one is close to failing or has real life left.
- Opener brand and age. LiftMaster, Chamberlain, Genie, Craftsman, and the rest all have their own logic boards, remotes, and safety sensor behavior. A part on hand beats a part on order, and we stock the components for the eight brands we service so a repair doesn’t turn into a two-week wait.
- Whether track and hardware get reused. On a new door, reusing sound track and hardware keeps you near the bottom of the $700 – $2200 range. A full tear-out with new track, springs, and opener pushes toward the top.
- Chicago winters and what they do to doors. The freeze-thaw cycle here is hard on anything metal that moves. Cold stiffens the lubricant in rollers and hinges, and a door that ran fine in October can start straining in January. Snow piled against the bottom seal and ice in the track are common causes of a door that won’t close. None of that is a design flaw, it’s just what a Northwest Side winter does to a mechanical system that lives in an unheated garage.
Repair or Replace? A Straight Answer
Here’s the rule we use. If the door’s structure is sound and the failure is a component (spring, cable, roller, opener), repair it. If the panels are rusted through, the door is out of square, or you’re repairing the same section for the second or third time, replacement starts to make financial sense.
A $200 spring repair on a door that will last another decade is money well spent. Spending $400 on panels for a door that’s already sagging and out of alignment is money that gets you another repair next year. We’ll tell you which side of that line you’re on, and we’ll show you why. A door replace typically runs $700 – $2200 in Dunning, so the math isn’t hard to run once you know what’s actually wrong.
For a broader look at how we handle the full range of repairs, see our garage door repair Belmont Cragin page.
How to Save on Garage Door Work in Dunning
There’s no magic discount, but there are real ways to keep the number down.
- Get the diagnosis right the first time. A door that won’t open isn’t always a broken spring. Sometimes it’s a safety sensor knocked out of alignment, which is a fraction of the cost to fix. Don’t let anyone quote a spring job before they’ve looked. A free estimate means exactly that: they look, they tell you what’s wrong, and the number is written down.
- Fix the small stuff before it compounds. Rollers at $110 – $220 and track realignment at $120 – $240 are cheap compared to the cable and spring damage that a shaking, misaligned door causes over a season.
- Ask about the second spring. If one spring broke and the other is near the end of its life, replacing both at once costs about twice the single-spring price but saves you a second service call later. Ask whether it’s worth it for your door. Sometimes it is, sometimes it isn’t, and you deserve the honest answer either way.
- Keep the door lubricated and the track clear. A few minutes with the right lubricant on hinges and rollers, and keeping ice and debris out of the track, is the cheapest maintenance there is. It doesn’t cost a service call.
- Compare repair to replacement with numbers, not feelings. Ask for both figures in writing. Then decide.
Free estimates are the easiest way to know where you stand. Call (833) 468-5695 and we’ll get a technician out to look at the door and give you a written range before any work begins.
A Safety Note Before You Touch Anything
Torsion springs, extension springs, and the cables that run with them are under serious tension. A torsion spring stores enough energy to cause severe injury if it releases while someone is working on it, and that’s true of a “simple” spring swap in a garage in Dunning as much as anywhere else. This is the one part of garage door work we’d never suggest a homeowner attempt. The same goes for anything involving the opener’s wiring or a power connection. Our technicians handle springs as a core service, with the tools and the training to do it safely, which is exactly why so many generalists won’t touch them. If your spring is broken, leave the door down and call.
Why Brand Matters on the Estimate
We’re trained on the eight brands that cover most of what’s on Dunning garages and the light-commercial buildings nearby: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters at estimate time because a repair on a door or opener we know well is a faster job than one where the technician is learning the system while the clock runs. It also means the parts are on hand rather than on order, so a Genie logic board or a Clopay panel doesn’t turn a same-day repair into a wait. If your brand isn’t on that list, tell us what you’ve got and we’ll be straight with you about whether we can help.
Our technicians have up to 10 years of experience. Every one of them works on garage doors and nothing else, so the diagnosis you get is from someone who sees the same failures every week, not a generalist fitting it in between plumbing calls.
FAQs – Garage Door Cost in Dunning
How much does garage door repair cost in Dunning?
Most garage door repairs in Dunning cost $150 – $600, depending on what failed. A single spring repair is $180 – $340, cable repair is $130 – $250, and opener repair is $120 – $320. The written estimate sets the final price. Call (833) 468-5695 for an exact quote, and estimates are free.
Is it cheaper to repair or replace a garage door in Dunning?
Repair is cheaper in almost every case where the door’s structure is sound, with common repairs at $150 – $600 versus $700 – $2200 for a new door installed. Replacement makes sense when panels are rusted through, the door is out of square, or you’re repairing the same section repeatedly. Call (833) 468-5695 and we’ll price both so you can compare with real numbers.
How much does a new garage door cost installed in Dunning?
A new garage door installed in Dunning typically runs $700 – $2200. The range depends on door size, material, and whether the existing track and hardware can be reused. Reusing sound hardware keeps you near the low end. Call (833) 468-5695 for a free estimate on your specific door.
How much does an opener replacement cost in Dunning?
Opener installation in Dunning is typically $250 – $550, and repairing an existing opener is $120 – $320. If the opener is repairable, we’ll say so rather than pushing a replacement. Call (833) 468-5695 to find out which one you’re looking at.
Can you come out today?
Same-day service is available for most garage door problems in Dunning, with fast dispatch from 7am to 7pm. Spring, cable, and opener failures are the jobs we handle most, so call (833) 468-5695 early and we’ll get you on the schedule. Estimates are free.
Get a Written Number Before Any Work Starts
Garage door pricing shouldn’t be a mystery. The ranges on this page give you a realistic sense of what a job in Dunning costs, and a free estimate turns that range into one specific number you can weigh before anyone lifts a tool. We work garage doors only, we work on the brand you already have, and we’ll tell you when the right fix is the cheaper one.
Call (833) 468-5695 for a free estimate. Same-day service, upfront pricing, and a written range before the work begins. If a spring broke this morning, leave the door down and let us know.
Pricing reflects the Dunning market as of 2026. Garage Door Repair Belmont Cragin offers free estimates – call (833) 468-5695.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Holly Hoffman"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Vivian Nguyen"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Heather Gallagher